About ZHURIN ELECTRONICS Co., Ltd

Full and abbreviated company name: ZHURIN ELECTRONICS Limited Liability Company, ZHURIN ELECTRONICS Co., Ltd.

TIN 5834032400, KPP 583401001

Legal, actual and postal address:

440072, Penza region, Penza, Antonova str., 3, office 410-412

Bank requisites: p/s 40702810812240003718 in the Central Branch of VTB Bank (PJSC) in Moscow, c/s 30101810145250000411, BIC 044525411

• 1996 Publication of a fully digital infrared passive detector for the first time in the world.
• Research and testing of new equipment samples are carried out at our own 0.5 Ha landfill.
• The element base used by the following manufacturers: Microchip Technology Inc., Telecontrolli, Linx Technologies Inc., Wavecom, etc.
• June 2006 Signing of an agreement with the Foundation for Assistance to the Development of Small Enterprises in the scientific and technical field for R&D "Development of an all-weather outdoor optoelectronic passive infrared detector".
• June 2006 A certificate of official registration of the computer program has been received.
• July 2007 Trial operation of "SPLAV V10GSM" in the branch of LLC "Volgotransgaz" - Penza Medical Treatment Plant MG.
• November 2007 Launch of pilot production of the linear security detector "SPLAV L50".
• November 2008 Prototypes of infrared security detectors "SPLAV V10", "SPLAV V10mini".
• February 2009 Prototypes of security detectors "SPLAV L50RA" based on nanowatt technologies
• January 2010 Launch of serial production of autonomous linear security detectors "SPLAV L50RA", "SPLAV L50GSM".
• January 2013 Launch of the "SPLAV L50RA2" with a Lonta Optima radio channel with a range of up to 10 km.
• February 2014 Ensuring the safety of the SPLAV detectors of the Olympic Games in Sochi.
• July 2013 Prototypes of autonomous mobile vibration detectors "SPLAV ACCEL"
• September 2014 Research and development of detectors with the "Multizone" effect
• January 2015 A new series of extractors "SPLAV L70", "SPLAV L70RA2" with a detection range of up to 70 meters.
• July 2016, The start of sales of the ACCEL GSM SPLAV vibration detector.
• December 2016. Registration of the trademark "SPLAV".
• September 2017 Prototypes of infrared and vibration detectors with developed radio channels for 800 meters and 13 km.
• November 2017, The start of mass production of autonomous volumetric detectors "SPLAV V10RA", "SPLAV V10RA2".
• April 2018 Development of adaptive sensitivity algorithms based on dynamic determination of interference characteristics.
• June 2018 Ensuring the safety of the SPLAV World Cup detectors.
• July 2018, The start of the introduction of a service mode in the SPLAV detectors, which allows fine-tuning of parameters.
• November 2018 Software update for ACCEL SPLAV vibration detectors: 3 operating modes with 5 sensitivity levels, quick selection.
• December 2018 Updating of the SPLAV L50M, SPLAV L70M, and SPLAV V10M models to work as part of the MURENA-K complex.
• January 2019 Implementation of the service mode in all SPLAV detectors and adaptive sensitivity mode in infrared detectors.
• September 2019 Start of serial production of perimeter detectors "SPLAV L50RA Livi", "SPLAV L70RA Livi" and "SPLAV V10RA Livi" for the Livicom smart home system
• June 2020. The SPLAV-DBK remote facility security system is the "FLOCK" version. 869.25 MHz, 20 detectors, 2 years of battery life, SMS notifications 30 km from the base station.
• May 2021. Autonomous outdoor radio siren "Siren m" for the "FLOCK" complex with an autonomous life of up to 2 years.
• May 2022. Fast-turning complex "SPLAV-DBK Bracelet" with a two-way radio channel LoRa 7.5 km with a receiver in the form of a wristwatch.