Integration of SPLAV detectors with LIVICOM Smart Home systems

The repeater is designed to connect Livi radio devices located in an area of uncertain radio reception. A repeater may be needed if the Livi devices are located far from the hub or if there are obstacles between the hub and the devices in the form of metal floors, reinforced concrete walls, etc.

Self-contained (up to 5 years of operation from a single power source) with 433MHz radio channel (Livicom) digital passive infrared detectors "SPLAV L50RA Livi", "SPLAV  L70RA Livi" and "SPLAV V10RA Livi" are designed to organize a mobile or stationary perimeter security line as part of the Livicom system (Smart Home, NPP "Stealth").

Autonomous (up to 7 years of operation from a power source) with a radio channel (transmission range of an alarm notification in line-of-sight conditions of at least 1000 m) digital passive infrared detector "SPLAV L50RA Livi" is intended for the organization of a mobile or stationary perimeter security line as part of the Livicom system.

Autonomous (up to 7 years of operation from a power source) with a radio channel (transmission range of an alarm notification in line-of-sight conditions of at least 1000 m) digital passive infrared detector "SPLAV L70RA Livi" is intended for the organization of a mobile or stationary perimeter security line as part of the Livicom system.

Digital autonomous optoelectronic passive infrared single-position detectors with a volumetric zone SPLAV V10RA Livi are designed to protect areas of territories, facilities as in in outdoor conditions, as well as indoors, when an intruder crosses a volumetric detection zone with an opening of 30 degrees vertically and 90 degrees horizontally, with a range of up to 10 meters at speeds from 0.1 to 5 m/s. An alarm notification is issued via a radio channel in the LIVICOM format for integration with the Smart Home system.

Livi Smart Hub 4G – the center of the Livicom system. Combines sensors and devices into a single whole. The hub controls the operation of the devices through commands received from the host, receives information from sensors, and sends notifications to the smartphone and the security console.The hub operates on Ethernet, Wi-Fi, and 2.5G, 4G cellular networks.

The module is designed to control electric motors of roller shutters, blinds, gates, roller shutter systems.

The sensor allows you to connect third-party wired devices with a dry contact output to the Livicom system. Two security, fire, emergency or technological alarm devices can be connected to one Livi US.

The device records the movement of people in the protected area. A volumetric detection zone, configurable protection from animals up to 20 kg. The sensor is supplied with a bracket called the Vivi Holder MS/MSW. You do not need to order an additional bracket.

The sensor detects attempts to kick down a door, squeeze out a window, or destroy a wall.

The device detects broken windows, storefronts, and glazed structures.

Intrusion detection: Livi CS instantly reacts to the opening or closing of doors, windows, hatches, gates, shutters. When an intrusion is detected, an alarm notification is transmitted to the owner's smartphone and to the security company's remote control at the same time (if the remote security service is connected).

The device measures air temperature and humidity in real time.

The device monitors the room temperature in real time.

A wireless device for taking readings of pulse water meters or single-phase single-tariff pulse electricity meters.

The wireless addressable fire detector monitors safety 24 hours a day and reports smoke. A built-in siren will alert you of a fire and wake you up at night, saving you from poisoning by combustion products. Gorenje

The wireless sensor detects the first signs of flooding. Two remote sensors for water leakage are included.

The device will detect a water leak, shut off the water or gas supply, and take readings of the hot and cold water meters.

The device allows you to control electrical appliances powered by 220 V mains and calculate power consumption. Turn devices on and off using your smartphone or the control button on the socket body.

The device is fixed over a window or door and records people entering through window or door openings. The surface detection area.Security companies will be able to receive alarms from the Livi MSW curtain type motion sensor installed at the Livicom facility after the release of the STEMAX 6.0 remote control.

The remote control allows you to control actuators and security modes, run scripts, and send an SOS signal.

Wireless remote control for arming and disarming without a smartphone. To control the security without a mobile application, the remote control buttons and are used.

RFID tag for use with the Livi RFID security control panel.

The device is designed to warn of danger, to deter intruders and attract the attention of neighbors.

The relay allows you to control electrical appliances and engineering systems powered by 220 V.

A relay with a galvanically isolated output of the "dry contact" type allows you to control electrical equipment powered by 12/24/220 V. The device supports pulse mode operation.