The ACS-101R wireless single-channel alarm kit, which is a multi-purpose receiver with manual push-button transmitters, is designed for use as a personal alarm button in security alarm systems, enabling/disabling these systems, as well as for remote control of any electronic device.
Equipment:
- electric gates;
- automatic lifting gates;
- electromagnetic locks;
- sliding doors;
- electric blinds;
- lighting devices, etc.
Four operating modes:
- SWITCHING mode“ON/OFF"
- PULSE mode.The range in open space is up to 500 meters
KEELOQ Jumping Code technology
- The maximum number of remotes with various codes training the receiver is 330
- Easily accessible receiver training with additional remotes
- Protection against unauthorized access (in the "Alarm button" mode)
- The memory of the last event is 30 minutes (in the "Alarm button" mode)
ALARM generation in case of power failure (in the Alarm Button mode) is an algorithm based on jumping code technology. The ACS-101R wireless remote control kit uses "jumping code" technology.Combinations of different codes transmitted by remote controls are not repeatable, as a result, radio scanning and code capture do not provide an opportunity to illegally control the receiver.
The data transmission format is a 66-bit code sequence. The range of manual push-button transmitters (remotes) depends on the installation location of this receiver. Natural obstacles or other environmental factors, sources of radio frequency or electromagnetic radiation can affect the transmission of the radio signal and, accordingly, the range of control of the receiver. For reliable reception of the radio signal: place the receiver at a height of at least 1.5 meters from the ground and as far away from radio frequency and electromagnetic emitters as possible.
Technical Specifications:
- Supply voltage: 12-16V;
- Consumption current:
- Standby Mode: 15mA/12V;
- Switching Mode: 28mA/12V;
- Range in open space: up to 500 meters;
- Code protection: KEELOQ;
- Operating Frequency: 433.92MHz ± 50kHz;
- Radiated power: <10mW;
- Receiver memory: 330 codes (remotes);
- Alarm notification time (in the ALARM BUTTON mode): 3sec
- Product ready-to-use time 0.5sec;
- Switching parameters of the relay: DC30V/1.0A; DC60V/0.3A; AC125V/0.5A; Tamper protection (in the ALARM BUTTON mode): TAMPER BUTTON
- Memory of the last event (in the "ALARM BUTTON" mode):-20 from +50 from 30 minutes;
- Operating temperature range: -20°C +50°C
- Storage temperature range: -40°C +80°C
- Dimensions: 85x40x20 mm;
- Weight: 125 grams.
