Digital autonomous optoelectronic passive infrared single-position detectors with a volumetric zone"SPLAV V10RA2" are designed to protect areas of territories, objects both outdoors and indoors by issuing an alarm notification via the Altonic RIF-RING 701 radio channel when an intruder crosses a volumetric detection zone with an opening of 30 degrees vertically and 90 degrees horizontally with a range of up to 10 meters at speeds from 0.1 to 5 m/s.
The detector is powered by a built-in battery (3.6 V AA battery SAFT LS14500 is included in the delivery package), with an estimated battery life of up to 7 years, subject to one alarm per day. The current consumption in standby mode is 20 Ma.
Alarm radio messages are received by any receiving devices in the RR-701 format: mobile receiver-keychain RR-701RM4, stationary receivers RR-701R, RR-701R15/4, RR-701R20, RR-200RD, RR-200PN. It is possible to use the RR-701RET repeater once.
It can be a part of the mobile fast-turning complex "SPLAV-FDMA".
Main technical characteristics:
- Transmission range of the alarm radio signal in line of sight:
- for a stationary RS-201R receiver With a remote antenna: 10,000 meters
- Detection range: up to 25 meters;
- Recommended detection range in outdoor conditions: 10 meters
- Adaptive sensitivity mode;
- Sensitivity levels: 15
The detectors use fully digital detection technology. The infringer detection algorithm is registered as intellectual property (certificate No. 2006612146 dated 06/20/06 ROSPATENT).
The integrated bracket is designed for mounting the detector on a wall or pole.
Detection zone:
Top view
Side view
To increase the stability of the detector in difficult conditions, it is possible to install a mode of increased protection against false alarms (the "FALSE IMMUNITY" jumper on the printed circuit board). At the same time, the maximum range of the detection zone is reduced to 8 meters.
Advantages:
- self-contained - does not require installation of power and communication wires
- long battery life - up to 7 years
- Easy to install, set up and easy to operate
- compatible with any receiving devices in the RR-701 format
- high mobility - the ability to easily move and quickly configure the security perimeter
Features:
- compatible only with receivers in the RR-701 format
- requires periodic replacement of the power supply
- the transmission range of the alarm depends on the terrain and the presence of radio interference
