Depending on the importance of the facility, the strategic situation and the capabilities of the owners, it is possible to build completely different protection options that will be effective and help prevent various kinds of incidents.
Possible applications are as follows:
- the simplest system: one wired SPLAV detector (L50, L70 or v10mini) powered by a 4-27 V DC voltage source (for example, an uninterruptible power supply with a battery in case of mains voltage loss BP20M) and a low-current siren activated via a normally-open detector relay.relay. In case of attracting the attention of others or a watchman, scaring off an intruder is quite a working, simplest and cheapest option.
- if there is a GSM network at the facility, when it is necessary to inform the owner about an intrusion into the intruder's detection zone or even just about a hacking attempt (vibration detectors)Instead of scaring him away, it is reasonable and convenient to use the autonomous detectors "SPLAV L50GSM", "SPLAV L70GSM", "SPLAV V10GSM" or "SPLAV ACCEL GSM". GSM". These detectors are convenient because they work independently for up to two years and do not require any wires or additional system components. They can be placed in one place or another, as well as for the protection of mobile objects (cars, trucks, boats). Disturbing information will notify the owner even if he is away from the facility - on a business trip or on a trip - you only need to be on a cellular network. If the battery runs out, an SMS will be sent. Charging is carried out via a mini USB connector using the supplied charger or any USB source with a current of more than 500 mA. It is possible to organize a system based on a PC and a GSM call reception module. The disadvantages of this type of device are the dependence on the availability of a cellular network, as well as the required dial-up time in case of an alarm of 10-25 seconds. The advantages of this detector are that it is the only simple, autonomous, mobile, self-sufficient device that works stably in a GSM network in outdoor conditions at temperatures from minus 40 degrees Celsius for remote facilities where there is no power supply.
- simple systems include systems consisting of autonomous radio channel detectors "SPLAV" (L50RA, L70RA, V10RA, ACCEL RA)and the RR-701RM4 key fob radio, which stores up to 4 detectors in memory. Point the detectors in an important direction, and hand the receiver-keychain to the watchman. Instant response at any time of the day or night is guaranteed! The detector battery lasts up to 7 years of continuous operation, depending on the frequency of alarms. The maximum range from the detectors to the receiver is 800 meters in line of sight. It is possible to use a repeater, expand the system with stationary receivers (from simple to 20 channels to complex ones with logging of 300 channels or data storage in a PC) and integrate into the existing security system via relay inputs.
- if the decision is made to protect the entire perimeter of the facility, the same devices described above are used with placement in the wake of each other, and sometimes towards each other, and even on several levels with a detection zone of 30 meters for L50, L50RA, L50RA2 or 50 meters for L70, L70RA, L70RA2 for outdoor conditions. Volumetric detectors V10RA, V10RA2, v10mini have a detection range of 8 or 10 meters. Radio channel systems are more expensive, but also sometimes more reliable than wired ones, since the supply and signal cables in industrial facilities are easily damaged. The installation process, and especially the adjustments when it is necessary to shift or place the detection zone in a different way, is incomparably more convenient for radio channel detectors. For very remote boundaries of radio channel detectors, remote antennas, repeaters, and RA2 versions are available for receiver consoles, capable of receiving alarming radio messages up to 10 km or more. Integration into existing security systems is carried out by means of receiver relays or relay extenders to the receivers. Radio channel detectors do not turn off, i.e. they have low consumption. The receivers are turned off. Sometimes several applications are installed, which prescribe different combinations of detectors for day and night operation.
- the use of mobile fast-turning complexes "SPLAV-DBK" can be very effective. A 4 kg case contains everything for an autonomous organization of 200 or 280 meters of perimeter. The working time of the detectors from one battery is up to 7 years, and the receiver-key fob is up to 2 months from one battery. Tripods can be supplied for independent placement of the detectors. The complex can be assembled based on the wishes and objectives of the customer. There are versions of bags for storing one tripod, a detector and a key fob receiver, or a bag for storing two tripods. Such complexes are used to organize temporary security lines. For example, for the duration of construction, for the duration of storage of building materials, or for the duration of repair of a part of the stationary security lines.
In outdoor conditions, the detectors usually operate in the false alarm protection mode (selected by installing the "FALSE IMMUNITY" jumper). For the organization of security inside premises, hangars, warehouses, boxes, such a mode is optional, and the range of the zone can be increased by increasing sensitivity (the jumper is removed).
