The device will detect a water leak, shut off the water or gas supply, and take readings of the hot and cold water meters.
Attention! The device works when connected via the Livi Smart Hub 4G.
Features:
- Connection of two electric ball valves: Two electric ball valves can be connected to Livi Water Control to automatically shut off the water if a leak is detected. You can also turn off the water manually, for example, before leaving, and protect your home or office from possible household accidents. Examples of compatible ball valves with electric drive:Neptun Bugatti Pro 12V,electric ball valve manipulator.
- Emergency water shut-off and leak alert: If the electric ball valves are connected, the module will automatically shut off the water in the event of a pipe break and send an alert about the accident to your smartphone. Shutting off the water quickly means avoiding the flood and its consequences.
- Two external leak sensors - included: The Livi Water Control comes with two external leak sensors for installation in places where water may accumulate, for example, under the sink and under the washing machine. If the sensor detects a leak, Livi Water Control will send a command to shut off the water.
- Collection of readings from two water meters with a pulse output: Livi Water Control supports the connection of two household water meters with a pulse output of the "dry contact" type (reed switch). The module is programmed to automatically transmit meter readings every 10 minutes. Examples of compatible water meters: Betar (SHV-15D/20D, SGV15D/20D), ITELMA BUILDING SYSTEMS (ITELMA WFK 24.D080/24.D110, ITELMA WFW 24.D080/24.D110). Starting from serial number 14100939, the module also supports the connection of two household water meters with NAMUR type pulse output.An example of compatible devices: the IP NORM (SVKM).
- Input for connecting to a 230 V network via a 5 V, 1 A adapter: The module is powered by two CR123A lithium batteries and does not require a mains connection to control the ball actuators. If you want to insure yourself or save battery power, connect the module to a 230 V network via a 5 V, 1 A power adapter. There is a connector on the module body for connecting it. The adapter itself is not included in the package and must be purchased separately.
- Terminal block for connecting external control buttons: Starting from serial number 14100939, the module is available with a terminal block for connecting external control buttons. Each tap has its own button connected. Using the button, you can open/close the faucet, stop its movement.
- Built-in buzzer for sound notification: Starting from serial number 14100939, the module is available with a built-in buzzer. The buzzer notifies about the power supply to the module, about pressing the control button of the power transmission line, about water leakage, about recovery from leakage, about opening the case, about detaching from the wall.
Features:
- Operating range 868 MHz
- Number of flood control zones 2
- Number of SHEP control outputs 2
- Number of counting inputs 2
- Type and parameters of the DC motor power transmission line
- rated voltage of 12 V
- rated power up to 2W
- Current consumption in sleep mode is 26 µA
- Current consumption in active mode up to 1 A
- Power supply (3 V) 2 CR123A batteries / 230 V mains input via a 5 V, 1 A power adapter (adapter not included)
- Operating temperature range from 0 to +55°C
- Overall dimensions 98 x 98 x 34 mm
Equipment:
- Livi Water Control Leak Protection Module
- 2 Livi LS C/li remote sensors>
- 2 CR123A lithium batteries (3V)
- 2 protective films for batteries
- Mounting Kit
- Rules and Conditions for the safe operation of Livi radio devices
